Skip to content

Court Builds

Tennis Court Installation in Palm Beach County

A singles and doubles court graded, surfaced, and fitted out so you can play year-round without drainage surprises.

  • On-Site Evaluation
  • Itemised Estimate
  • Final Walkthrough
  • Backyard to Commercial
A blue and tan outdoor tennis court viewed through an open chain-link fence on a sunny day.

What Goes Wrong

Where rushed tennis court builds fail, and what a thorough build does instead

Skipped Grade Check

A base laid without confirming drainage slope will hold standing water after every South Florida rain, softening the sub-base over time.

Drainage Set at Base Stage

Surface slope is established during base preparation, not patched after the acrylic coat is down and the problem is visible.

Undersized Footprint

Ignoring run-off clearance leaves players cramped at the baseline and may put the court outside Palm Beach County setback rules.

Run-Off Confirmed First

Usable dimensions and setback compliance are confirmed on-site before the layout is staked, so the court fits the lot legally.

UV-Unstable Surface

A coating not rated for year-round sun exposure fades and chalks within two seasons in South Florida’s climate, making lines hard to read.

UV-Stable Acrylic Coat

The acrylic color coat is specified for continuous outdoor exposure, keeping line contrast and surface texture through the full play season.

Mid-Project Surprises

Soil instability or unexpected drainage work discovered after the contract is signed drives scope changes and unplanned delays mid-build.

Scope Written After Assessment

Soil stability, drainage direction, and run-off space are all evaluated on-site before the written estimate is issued, not after work starts.

Common problems, answered

Scope of Work

What a full tennis court installation covers

Every phase from raw ground to a playable, lined, and fitted court is handled as part of the build.

Site Measurement & Grade Check

Available footprint, run-off clearance, and drainage direction are confirmed before any layout is staked or base work is scoped.

Base Preparation & Drainage Setup

Site grading, sub-base compaction, and asphalt or concrete base installation with surface slope set for South Florida rain volumes.

Acrylic Surface Application

UV-stable acrylic coating applied after the base cures, giving a consistent playing surface rated for year-round outdoor use.

Line Striping

Singles and doubles lines marked to regulation positions after the cure interval, with clear contrast against the court color.

Net Posts & Tennis Net

Posts set in concrete at the specified depth, net tensioned and height-checked during the final walkthrough before handover.

Perimeter Fencing

Court fencing installed to contain play and defined to suit the property boundary and any applicable HOA or county requirements.

Residential Backyard Courts

Private courts sized to the available lot and setback rules.

HOA & Community Courts

Multi-court layouts for shared residential facilities.

School & Commercial Courts

Regulation courts for clubs, schools, and managed properties.

Tennis Court Builds

A tennis court installation scoped from the ground up

The site assessment determines what the base needs before any surface material or net hardware is ordered.

The builder begins with a site measurement and grade check that covers available footprint, run-off clearance, and drainage direction. Palm Beach County lot sizes and setback rules affect how much run-off space is realistically available, and the builder confirms usable dimensions before the layout is staked. Singles and doubles line positions are planned at this stage.

Base preparation covers site grading, sub-base compaction, and installation of an asphalt base layer or concrete slab foundation. South Florida’s high humidity and seasonal rain put extra demand on drainage design, so surface slope is set during base prep rather than corrected after the surface is applied. Drainage setup is confirmed before any acrylic coating is scheduled.

Acrylic surface coating is applied after the base cures, with UV stability specified for year-round outdoor play. Line striping for singles and doubles layouts follows the cure interval. Net posts are set in concrete at the specified depth, and the net is tensioned and height-checked during the final walkthrough before the court is handed over.

Why Choose Us

Why Palm Beach County Sports Courts for tennis court installation?

Every build starts with an on-site evaluation and ends with a signed-off walkthrough, nothing is left to assumption in between.

Assessment Before Scope

No written estimate is issued until drainage, soil stability, and run-off space are checked on-site in person.

Itemised Written Estimate

Base prep, surfacing, fencing, and line marking appear as separate line items, so every phase is accounted for upfront.

Final Walkthrough Included

Net height, line positions, and drainage are verified at handover before the job is considered complete.

Local Conditions Knowledge

Builders familiar with Palm Beach County setbacks, water table depth, and seasonal storm drainage requirements handle each job.

Residential to Commercial Range

The same scoping process applies to backyard courts, HOA facilities, school courts, and managed commercial properties.

A completed sports court builder job at a house
A finished sports court builder project

The Process

From first enquiry to a playable court

  1. 01

    Request Your Evaluation

    Share your site details and a local builder is arranged to assess the ground, drainage, and available footprint in person.

  2. 02

    Review Your Estimate

    An itemised written estimate covering base preparation, surfacing, fencing, and line marking is issued after the on-site assessment.

  3. 03

    Build & Final Walkthrough

    The court is graded, surfaced, lined, and fitted out, then checked against net height and drainage before handover.

Pricing Estimates

Typical Tennis Court Installation Prices

JobTypical Cost
New Har-Tru court$45,000-$80,000
New asphalt court$45,000-$80,000
New tennis court with upgrades$60,000-$120,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Tennis court installation questions answered

How much does it cost to install a tennis court?

Most tennis court installations in Palm Beach County come in at $45,000-$80,000, depending on surface type, site conditions, fencing, and lighting. An on-site evaluation produces an itemised written estimate so you see every line item before work begins.

What makes the cost of a tennis court go up?

The biggest cost drivers are poor soil requiring deep base work, sloped lots needing significant grading, premium surfaces like post-tension concrete, and added fencing or lighting. Each factor is identified during the on-site evaluation and broken out in the written estimate before you commit.

What is the cheapest way to build a tennis court?

An asphalt base with an acrylic coating is typically the lowest-cost route for a full regulation court. Skipping lighting and choosing a standard chain-link fence also keeps the budget down. Cutting corners on base preparation, however, leads to cracking and resurfacing costs within a few years.

How much space do I need for a tennis court with room around it?

A regulation doubles court is 78 feet long by 36 feet wide. With the recommended run-off clearance, the total footprint is typically 120 feet by 60 feet. Singles-only play can use a slightly narrower envelope, but the length stays the same.

Is my property big enough for a tennis court and the run-off space it needs?

You need a clear, roughly level area of at least 120 by 60 feet after accounting for any setbacks or easements. The on-site evaluation measures usable space, checks for obstructions, and confirms whether the footprint fits before any work is planned.

Does a tennis court add value to a property?

Yes, in markets where buyers expect resort-style amenities, a regulation court in good condition is a genuine differentiator. A cracked or neglected court, however, can read as a liability. Keeping the surface in good shape through periodic resurfacing protects that value.

How is a tennis court built?

The process starts with site evaluation and grading, followed by a compacted aggregate base, then an asphalt or concrete structural layer. An acrylic color coating and texture system goes on top, and finally the lines are painted to regulation dimensions. A final walkthrough confirms everything meets spec before sign-off.

Will the court drain well and stay level over time?

Proper drainage starts with the on-site evaluation, which assesses soil and existing drainage before a single grade is cut. A correctly compacted base and a 1-percent cross-slope built into the surface move water off the court and reduce the settling risk that causes cracking over time.

More questions about Tennis Court Installation?

Tell Us Your Site & Sport

Share the space and what you want to play. We’ll arrange an on-site evaluation and a written estimate covering every phase of the build.

Request an Estimate