Every component from ground prep to the final net tension check is included in the full-scope estimate.
Site Grading & Aggregate Base Preparation
Soil is evaluated, the footprint is graded, and a compacted aggregate base is laid to the correct drainage slope before any slab work begins.
Concrete or Asphalt Slab
Concrete delivers long-term dimensional stability; asphalt installs faster and compacts well, the right choice depends on subgrade conditions and site constraints.
Acrylic Surface Coating
Color coat is applied after the full cure interval, bonding to a stable slab and providing the consistent ball response the game requires.
Court Striping & Line Layout
Playing lines are marked to regulation dimensions, sidelines, baselines, kitchen line, and centerline, using durable court-grade paint.
Net Post System
Posts are set in concrete at regulation spacing, with a permanent net system that holds correct height without seasonal adjustment.
Perimeter Fencing
Hurricane-rated fencing is installed around the court perimeter, keeping play contained and standing up to Palm Beach County wind loads.
Residential Court Builds
Single-court installs for homeowners and residential lots.
HOA & Community Courts
Multi-court layouts for shared community use.
School & Club Facilities
Full-spec builds for organized play and instruction.
Commercial Property Courts
Courts for hotels, resorts, and managed properties.
Built to Play
What a Full Pickleball Court Installation Covers
Surface failures almost always trace back to skipped base prep or inadequate drainage slope, both are addressed before any coating goes down.
Site grading and aggregate base preparation are the foundation of a court that holds up. Public courts in West Palm Beach fill fast, driving homeowners and HOAs to add private courts on their own properties. The on-site evaluation checks soil stability, drainage direction, and available footprint before the base scope is written. A poorly graded site causes surface cracking regardless of coating quality, so this step is never skipped.
Concrete and asphalt are both viable base options, and the right choice depends on the site. Concrete offers long-term dimensional stability and is the preferred base where the subgrade is firm. Asphalt installs faster and performs well when compacted correctly. Either base receives an acrylic surface coating applied after the full cure interval, the coating bonds to a fully cured slab, not a green one, and that timing is what keeps the surface intact through Florida’s summer-storm cycles.
Court striping, net post installation, and perimeter fencing complete the build. Playing line layout follows regulation dimensions, and net posts are set in concrete at the correct spacing for a permanent net system. Hurricane-rated fencing handles Palm Beach County wind loads without the flex that loosens tension over time. A final walkthrough checks surface level, line placement, net height, and fence tension before the court is handed over.
Why Us
Why Palm Beach County Sports Courts for This Build
Every step from site visit to handover is documented, so nothing is assumed and nothing is skipped.
Evaluation Before Any Commitment
An on-site visit assesses drainage and soil before a single scope item is written.
Itemised Written Estimate
Base prep, surfacing, fencing, and line marking are each listed separately, no bundled totals.
Full-Scope Handover
The estimate covers every component so the court is ready for play at handover, not after follow-up visits.
Local Site Knowledge
Palm Beach County’s water table and storm drainage patterns are factored into the base design from the start.
Final Walkthrough Included
Surface level, net height, line placement, and fence tension are all checked before sign-off.
Questions About Pickleball Court Installation in Palm Beach County
How much does it cost to install a pickleball court on my property?
Most residential pickleball court installations in Palm Beach County come in at $20,000-$50,000, depending on site conditions, surface choice, and whether fencing or lighting is included. An on-site evaluation produces an itemised written estimate so you see exactly what each line item covers before any work begins.
How big does my backyard need to be for a pickleball court?
A regulation pickleball court is 20 feet wide by 44 feet long, but you need a minimum of 30 by 60 feet to allow safe out-of-bounds space around the lines. Tighter yards can sometimes work with a slightly reduced buffer, which the on-site evaluation will confirm.
Will a pickleball court fit in my available space?
It depends on whether you have at least 30 by 60 feet of reasonably level ground. The on-site evaluation measures the usable area, checks for trees, utilities, and setback requirements, and tells you definitively whether a full court, a reduced-buffer layout, or a multi-sport alternative makes more sense.
Do I need a full court, or can I just mark lines on an existing slab?
If your existing slab is structurally sound, level, and drains properly, adding pickleball lines and a net post sleeve is a low-cost starting point. Cracked, heaving, or poorly draining concrete will cause ball bounce problems and worsen over time, so the slab condition determines whether striping alone is enough.
Is asphalt or concrete better for a pickleball court?
Concrete is harder and more dimensionally stable, which means fewer cracks over time in Florida’s heat, but it costs more upfront. Asphalt is less expensive to install and easier to patch, but it softens slightly in extreme heat and typically needs resurfacing sooner. Both surfaces accept the same acrylic color coating and line markings.
What is the cheapest way to build a pickleball court?
The lowest-cost permanent option is an asphalt base with a single-color acrylic surface and painted lines, skipping fencing and lighting initially. That gives you a playable, durable court you can upgrade later. Cutting corners on base thickness or drainage is where costs come back as repairs, so those are not worth skimping on.
How much site prep do I need before building a pickleball court?
Every project starts with clearing vegetation, grading the area to a consistent slope of roughly 1 percent for drainage, and compacting a crushed-stone sub-base before any asphalt or concrete goes down. Sandy South Florida soil often needs additional stabilisation, which the on-site evaluation identifies before work begins. See court design & site preparation for more detail.
Do you handle drainage and slope so water does not pool on the court?
Yes. The on-site evaluation specifically checks existing drainage patterns, and the grading plan builds in a consistent slope so rainwater runs off the surface rather than pooling. In low-lying yards, perimeter drainage channels or French drains are added to the scope and included in the itemised estimate.