Surface Restoration
Stop cracks, pooling water, and faded lines from getting worse, restore a safe, even playing surface.
What Goes Wrong
The surface is rarely the root cause, skipping the base and drainage assessment is.
Filling a crack without checking base movement or drainage means the same crack reopens under the next rain cycle.
A flexible crack-filling compound matched to the movement pattern holds after the base condition is confirmed stable.
A patched area that sits proud or recessed changes the ball bounce and creates a visible color mismatch across the court.
Patching compound is feathered to the surrounding surface profile so the finished area plays and looks even across the full court.
Resurfacing over a low spot without correcting the drainage slope traps water in the same place after every rain.
Low spots are mapped during the surface level check, and drainage slope is corrected before any resurfacing compound is applied.
A standard acrylic coating applied in South Florida’s UV conditions can break down and peel within two seasons if the wrong spec is used.
The acrylic coating is selected for UV stability, and cure and recoat intervals are observed before line striping begins.
Scope of Work
From a single cracked panel to a full acrylic recoat, the scope is set by what the inspection finds, not a fixed package.
Flexible sealant is matched to crack width and movement pattern, then applied and allowed to cure before any overcoat.
Peeled or deteriorated acrylic areas are patched with resurfacing compound and feathered to restore an even playing surface.
A new acrylic color coat is applied over the prepared surface with cure intervals observed between each layer.
Low spots that hold standing water are identified during the surface level check and corrected before resurfacing begins.
Regulation lines are applied with striping paint after the surface has fully cured, covering single-sport and multi-sport layouts.
Periodic surface wear inspections catch early cracking, drainage shifts, and coating fade before they require larger repairs.
Acrylic recoat with regulation line striping.
Crack filling, patching, and court line restriping.
Surface wear inspection and line marking refresh.
Full recoat with overlapping sport line layouts.
Why Choose Us
Repair work is only as good as the inspection that precedes it, here is how accountability is built into every job.
No estimate is issued until the surface, base layer, and drainage slope are assessed on-site in person.
Crack filling, patching, resurfacing, and line striping are listed as separate line items so you see exactly what you are paying for.
Low spot leveling and slope correction are included in the resurfacing scope, not added as a change order after work starts.
Surface slope, drainage flow, and regulation line placement are all confirmed with you before the job is considered complete.
Backyard courts, HOA facilities, school courts, and commercial sports surfaces are all within the service scope.
The Process
01
Submit your court details and we arrange an on-site visit to assess surface condition, cracks, drainage, and base layer.
02
You receive an itemised estimate listing crack filling, patching, resurfacing, and line striping as separate scoped line items.
03
The builder completes the repair sequence and confirms surface slope, drainage, and line marking with you at the final walkthrough.
Pricing Estimates
| Job | Typical Cost |
|---|---|
| Basic resurfacing | $4,000-$10,000 |
| Acrylic resurfacing | $7,000-$15,000 |
| Major repair and resurfacing | $12,000-$40,000 |
Every enquiry starts with a free on-site evaluation, no written scope is issued until the surface, base, and drainage have been assessed in person.