Skip to content

Court Lighting & Fencing

Court Lighting & Fencing in Palm Beach County

A fully enclosed, evenly lit court so you can play after sundown without dark spots or balls leaving the court.

  • Free On-Site Evaluation
  • Itemised Written Estimate
  • Final Walkthrough
  • Backyard to HOA Courts
View of outdoor tennis or pickleball courts enclosed by a chain-link fence with privacy screens, surrounded by trees under a cloudy sky.

What Goes Wrong

The gaps that make a court frustrating to use

Lighting and fencing installed without coordination leave problems that are expensive to fix after the fact.

Uneven Light Coverage

Fixtures added without a layout plan create shadows at sidelines and corners, making the ball hard to track.

Coordinated Fixture Layout

Pole heights and fixture aim angles are calculated against the court footprint before any post is set.

Fence Lean & Shift

Posts set without adequate concrete depth will lean over time, leaving gaps that let balls escape the perimeter.

Concrete Post Setting

Galvanized steel posts are set in concrete at the specified depth and checked for plumb before mesh is tensioned.

Light Spill on Neighbors

Fixtures aimed without checking adjacent property lines can direct glare into windows, creating disputes and code issues.

Spill Check at Walkthrough

Fixture aim is adjusted during the final walkthrough to keep light on the court surface and off neighboring properties.

Permit Gaps

Fence height and outdoor electrical installations both require Palm Beach County permits; missing either can trigger stop-work orders.

Permit-Aware Planning

Both fence and electrical permit requirements are accounted for during the layout phase, before any installation begins.

Common problems, answered

Scope of Work

What a court lighting & fencing installation covers

From layout planning through final testing, every component of the enclosure and lighting system is handled together.

Perimeter Fencing Installation

Galvanized steel posts set in concrete, vinyl-coated chain link mesh tensioned to the agreed height, keeping balls contained and the court defined.

Gate Hardware & Alignment

Gates fitted with aligned hardware and confirmed for smooth swing before the fence is signed off, so access points work from day one.

LED Fixture Mounting & Aiming

LED fixtures mounted on poles at heights calculated for full court coverage, then aimed and tested to eliminate dark spots across the surface.

Outdoor Wiring & Electrical Hookup

Wiring run to South Florida outdoor electrical code, connecting fixtures to a power source with no exposed runs or undersized conduit.

Layout Planning

Fence lines and fixture positions mapped before any post is set.

Post Stability Inspection

Each post checked for plumb and depth before tensioning begins.

Light Coverage Check

Full court surface tested for even illumination at sign-off.

Fence Tensioning

Mesh pulled tight to prevent sag between posts over time.

Lighting & Enclosure

A court that works after dark and keeps the ball in bounds

Lighting and fencing planned together prevent the gaps in coverage and containment that make a court frustrating to use.

Request an Estimate

The builder lays out fixture positions and fence lines before any posts are set, so light coverage and ball containment are coordinated across the same footprint. Palm Beach County permit requirements apply to both fence height and outdoor electrical installations, and the builder accounts for both during the planning phase.

Fence installation starts with concrete post setting at the specified depth for galvanized steel posts. Vinyl-coated chain link mesh is tensioned to the agreed height, and gate hardware is fitted and aligned. Post stability is confirmed before the mesh is tensioned to prevent lean or shift over time.

LED fixtures are mounted on lighting poles at heights calculated to cover the full court surface without dark spots. Outdoor wiring is run to code, and fixtures are aimed and tested before sign-off. In dense Palm Beach County neighborhoods, light spill toward adjacent properties is checked and adjusted during the final walkthrough.

Why Choose Us

Why Palm Beach County Sports Courts for lighting & fencing?

Business-level accountability at every stage, from the first site visit through the final coverage test.

On-Site Evaluation Before Any Scope

No written estimate is issued until the ground, drainage, and site conditions are assessed in person.

Itemised Estimates, No Surprises

Posts, wiring, fixtures, mesh, and gates are listed as separate line items so you see exactly what you are paying for.

Permit Requirements Built Into the Plan

Both fence height and outdoor electrical permits are addressed in the planning phase, not discovered mid-installation.

Final Walkthrough Before Sign-Off

Light coverage, fence stability, gate alignment, and light spill are all confirmed on-site before the job is closed.

Residential to Commercial Scope

The same installation process applies whether the court is a backyard setup, an HOA facility, or a commercial property.

A completed sports court builder job at a house
A finished sports court builder project

The Process

From first call to a fully lit, enclosed court

Request an Estimate

  1. 01

    Request Your Evaluation

    Submit your site details and we arrange an on-site visit to assess the space, drainage, and permit requirements.

  2. 02

    Review Your Written Estimate

    You receive an itemised estimate covering post setting, mesh, fixtures, wiring, and gates as separate line items.

  3. 03

    Installation & Final Walkthrough

    The builder installs both systems together, then tests light coverage and fence stability before signing the job off.

Pricing Estimates

Typical Court Lighting & Fencing Prices

JobTypical Cost
Fence around one court$8,000-$20,000
Court lighting package$10,000-$30,000
Lighting and fencing together$20,000-$45,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about court lighting & fencing in Palm Beach County

How do I know if my court needs both lights and fencing?

You need both if you want to play after dark and keep balls on the court. Lights alone let you see; fencing alone keeps play contained. Most courts benefit from both installed together, since the posts and wiring runs are planned as one system rather than retrofitted separately.

Can I just add a few lights instead of doing the full lighting setup?

A partial setup usually creates uneven brightness, leaving corners and sidelines in shadow. A full layout spaces fixtures so light levels are consistent across the entire playing surface. Spot-adding lights later costs more in extra wiring runs and rarely matches the coverage of a planned system.

Will fencing keep most balls from getting out?

Yes, when the fence height matches the sport. Tennis typically needs 10 feet at the ends and 8 feet on the sides; pickleball and basketball work with 8 feet. A fence that is too short lets high shots clear it, so height selection matters as much as the material.

What should I check before choosing court lighting and fencing?

Check available space around the court perimeter, the sport being played, any HOA or municipal height restrictions, and whether your electrical panel can support the lighting load. Soil conditions also affect post depth and footing design, especially in sandy or coastal areas.

How do I make sure the lights cover the whole court, including the corners and sidelines?

Fixture placement is calculated using a photometric layout, which maps light levels across the full surface before installation. Poles are positioned at specific intervals along the sidelines, and fixtures are aimed to overlap coverage zones so corners receive the same foot-candles as the center.

How tall and strong should the fence be for my court?

Tennis courts typically use 10-foot end fencing and 8-foot side fencing; pickleball and basketball courts generally use 8 feet throughout. Posts should be set in concrete footings sized for local wind loads. In Palm Beach County, hurricane-rated hardware and heavier gauge chain link are worth specifying.

Where should the lights be placed so I do not get dark spots or shadows?

Poles are placed along the long sides of the court, offset from the playing surface, with fixtures angled inward at a calculated tilt. Mounting height, fixture spacing, and beam angle work together. Placing poles only at the ends creates shadows in the mid-court area, so side placement is standard.

Will the lights shine into my windows or onto my neighbor’s property?

Directional fixtures with shields or visors limit spill light to the court footprint. The site evaluation looks at neighboring structures and property lines so fixture aim can be adjusted before installation. Full-cutoff LED fixtures are the most effective option for keeping light off adjacent properties.

More questions about Court Lighting & Fencing?

Get a Court That Works After Dark

Share your site and sport. We’ll arrange a free on-site evaluation and a written estimate covering every component of the lighting and fencing installation.

Request an Estimate